Images are examples, some edited with AI. The technical data are authoritative. AI notice
FRL service unit 2-part, G1/2, 0.5-10 bar, with gauge, automatic drain NO, flow from right - Airtec FROX-12-10-5-1331
Two-part service unit with filter regulator and lubricator, Airtec X series, size X2, G1/2 port, 0.5-10 bar regulating range. Flow up to 5250 Nl/min, automatic drain NO, with pressure gauge. Inlet pressure 1.5 to 16 bar, oil and condensate bowls made of PC.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Airtec FROX-12-10-5-1331 prepares compressed air in three steps: filtering, regulating and lubricating. The filter regulator removes particles and condensate with a 5 µm filter and holds the outlet pressure within 0.5-10 bar. The downstream lubricator adds oil to the air stream from a flow of 170 Nl/min.
Benefits
- Three stages in one assembly: 5 µm filter, pressure regulator and lubricator.
- Lubrication from 170 Nl/min: the lubricator responds even at low flow rates.
- Automatic condensate drain empties the bowl without operator action.
- Hazardous areas: no inherent potential ignition source with reference to Directive 2014/34/EU, usable in zones 1, 2, 21 and 22 subject to the local requirements.
Applications
Compressed air supply for cylinders, valves and pneumatic tools operated with lubricated air.
Technical data
| Feature | Value |
|---|---|
| Type | service unit, 2-part: filter regulator and lubricator |
| Series / size | X / X2 |
| Port | G1/2 |
| Regulating range | 0.5-10 bar |
| Filtration | 5 µm |
| Flow | 5250 Nl/min |
| Lubricator response threshold | 170 Nl/min |
| Inlet pressure | 1.5 to 16 bar |
| Oil and condensate bowls | PC |
| Condensate bowl volume | 50 cm³ |
| Oil bowl volume | 125 cm³ |
| Condensate drain | automatic, NO (open at 0 bar inlet pressure) |
| Pressure indication | with pressure gauge |
| Flow direction | right to left |
| Handwheel | standard |
| Mounting position | vertical, drain valve at the bottom |
| Temperature range | -10 to +60 °C |
| Medium | compressed air to ISO 8573-1:2010, neutral gases |
| Body | zinc die-cast |
| Seals | NBR |
| Internal parts | galvanised steel, stainless steel, brass |
| Manufacturer | Airtec |
| Hersteller-Nr | FROX-12-10-5-1331 |
| GPSR Herstellerdaten | AIRTEC Pneumatic GmbH, Westerbachstraße 7, DE-61476 Kronberg, www.airtec.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | mit Manometer, Durchfluss von rechts nach links |
| Bauform | Baugröße X2 |
| Behälterausführung | PC |
| Anschlussgröße | G1/2 |
| Thread | G 1/2 |
| Housing material | Die-cast zinc |
| Flow rate [l/min] | 5250 |
| Druckregelbereich [bar] | 0,5 - 10 |
| Dichtungen | NBR |
| Series | FROX |
| Betriebsdruck max [bar] | 16 |
| Temperaturbereich | -10-60 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.




