Combined air service unit, G 3/4", 0.5 - 6 bar, with bowl guard, inlet 0 - 16 bar

In use, the combined air service unit combines filter, regulator and lubricator in one body and prepares the compressed air ahead of the consumer. It is produced from zinc die casting with NBR seals. The data give a face-to-face length of 93 mm. In addition the data give the G 3/4" port, the plastic bowl with protective cage and an inlet pressure of 0 - 16 bar.

Benefits

• Filter, regulator and lubricator in one unit with the G 3/4" port.
• Pressure control range 0.5 - 6 bar at an inlet pressure of 0 - 16 bar.
• Flow rate 50 - 3400 l/min in size 2.
• Filter pore size 40 µm, the oil reservoir sits inside the filter bowl.
• Condensate drain manual with a gauge reading 0 - 10 bar.
• Temperature range 0 to +50 °C as per the data sheet.

Applications

In the workshop the flow of 50 - 3400 l/min supplies screwdrivers and blow guns with lubricated air.