Images are examples, some edited with AI. The technical data are authoritative. AI notice
Proportional pressure regulator 0.1 to 10 bar G1/4 VPPE-3-1-1/4-10-420-E1-F1A - Festo 8181688
Proportional pressure regulator for electrical pressure setting in the range 0.1 to 10 bar, setpoint 4 - 20 mA. Standard nominal flow rate 2300 l/min, port G1/4, max. pressure hysteresis 0.05 bar and degree of protection IP65. Genuine Festo part 8181688.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo VPPE-3-1-1/4-10-420-E1-F1A regulates the output pressure in proportion to the 4 - 20 mA setpoint, pressure regulation range 0.1 to 10 bar. It delivers a standard nominal flow rate of 2300 l/min and is connected via G1/4. Design: piloted diaphragm regulator.
Benefits
- Fine pressure control: max. pressure hysteresis 0.05 bar
- Repeatable results: linearity 1 %FS, repeatability 0.5 %FS
- Air capacity: standard nominal flow rate 2300 l/min
- Actual value feedback to the controller via analogue output 4 - 20 mA
- Defined safety position: if the power supply cable is interrupted, output pressure is maintained unregulated
- PNP switching output for limit value signals
Operating conditions
The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] and inert gas. Lubricated operation is not possible. Mounting position of the VPPE-3-1-1/4-10-420-E1-F1A: any, preferably upright, mounting: with through-hole. Permissible ambient temperature 0 to 60 °C. The VPPE-3-1-1/4-10-420-E1-F1A is suitable for Li-ion battery production (reduced Cu/Zn/Ni content, F1a). Electrical connection of the VPPE-3-1-1/4-10-420-E1-F1A: 5-pin, M12, plug.
Technical data
| Type | VPPE-3-1-1/4-10-420-E1-F1A |
|---|---|
| Festo part number | 8181688 |
| Nominal size, supply | 5 mm |
| Nominal size, exhaust | 2.5 mm |
| Type of actuation | Electrical |
| Sealing principle | Soft |
| Mounting position | Any, Preferably upright |
| Design | Piloted diaphragm regulator |
| Short circuit current rating | For all electrical connections |
| Safety instructions | Safety position VPPE: if the power supply cable is interrupted, output pressure is maintained unregulated. |
| Reverse polarity protection | For all electrical connections |
| Type of reset | Mechanical spring |
| Type of piloting | Piloted |
| Valve function | 3-way proportional pressure regulator |
| Display type | LED indicator, 3 digits |
| Pressure regulation range | 0.1 to 10 bar |
| Inlet pressure 1 | 6 to 11 bar |
| Max. pressure hysteresis | 0.05 bar |
| Standard nominal flow rate (standardised to DIN 1343) | 2300 l/min |
| Operational voltage range DC | 21.6 to 26.4 V |
| Max. current consumption | 160 mA |
| Duty cycle | 100% |
| Max. electrical power consumption | 4.2 W |
| Residual ripple | 10% |
| Switching output | PNP |
| Signal range analogue output | 4 - 20 mA |
| Signal range analogue input | 4 - 20 mA |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gas |
| Note on operating and pilot medium | Lubricated operation not possible |
| Approval | RCM, c UL us - Listed (Oil) |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Certificate issuing authority | UL E322346 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Media temperature | 10 to 50 °C |
| Degree of protection | IP65 |
| Ambient temperature | 0 to 60 °C |
| Product weight | 390 g |
| Linearity | 1 %FS |
| Hysteresis | 1 %FS |
| Reproducibility | 0.5 %FS |
| Total accuracy | 1.25 %FS |
| Temperature coefficient | 0.04 %/K |
| Electrical connection | 5-pin, M12, Plug |
| Type of mounting | With through-hole |
| Pneumatic connection, port 1 | G1/4 |
| Pneumatic connection, port 2 | G1/4 |
| Pneumatic connection, port 3 | G1/8 |
| Note on materials | RoHS compliant |
| Material housing | Aluminium, powder-coated |
| Manufacturer | Festo |
| Hersteller-Nr | VPPE-3-1-1/4-10-420-E1-F1A |
| EAN | 4052568779504 |
| Zolltarifnummer | 84811099 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Thread | G 1/4 |
| Control range max. [bar] | 10 |
| Medium | Compressed air, neutral gases |
| Function | 3-way proportional pressure regulating valve |
| Inlet pressure max. [bar] | 11 |
| Flow rate [l/min] | 2300 |
| Actuation type | Electrical |
| Druckregelbereich [bar] | 0,1 bis 10 |
| Medientemperatur [°C] | 10 bis 50 |
| Pneumatic connection | G1/4 |
| Protection rating | IP65 |
| Temperaturbereich | 0-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







