Weld neck flange, DN 150, PN 40, pipe 168.3 mm, DIN 2635 and EN 1092-1 (type 11), 1.4571

This weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. The data sheet gives a nominal size of DN 150. The stated figures are a pipe outside diameter of 168.3 mm and a flange outside diameter of 300 mm. This version is supplied with the version to DIN 2635 and EN 1092-1 (type 11) and 8 bolt holes.

Benefits

• Nominal size DN 150 at a nominal pressure of PN 40 to DIN 2635 and EN 1092-1 (type 11).
• Welding end of 168.3 mm outside diameter and 4.5 mm wall thickness.
• Flange outside diameter 300 mm on a bolt circle of 250 mm.
• 8 bolt holes of 26 mm diameter.
• Overall height 75 mm with a formed hub for the transition to the pipe.
• Material 1.4571 for the choice by medium and surroundings.

Applications

In pipework the flange is welded onto a pipe of 168.3 mm outside diameter and drawn together with 8 bolts.

Standards and conformity

The dimensions are based on DIN 2635 and EN 1092-1 (type 11) in the type 11 design with a formed hub.