Weld neck flange, DN 100, PN 6, pipe 114.3 mm, DIN 2631 and EN 1092-1 (type 11), 1.4571

Once installed, the weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. The data also state a nominal pressure of PN 6. This version comes with a pipe outside diameter of 114.3 mm and a flange outside diameter of 210 mm. In addition the data give the version to DIN 2631 and EN 1092-1 (type 11) and 4 bolt holes.

Benefits

• Nominal size DN 100 at a nominal pressure of PN 6 to DIN 2631 and EN 1092-1 (type 11).
• Welding end of 114.3 mm outside diameter and 3.6 mm wall thickness.
• Flange outside diameter 210 mm on a bolt circle of 170 mm.
• 4 bolt holes of 18 mm diameter.
• Overall height 45 mm with a formed hub for the transition to the pipe.
• Material 1.4571 for the choice by medium and surroundings.

Applications

In pipework the flange is welded onto a pipe of 114.3 mm outside diameter and drawn together with 4 bolts.

Standards and conformity

The dimensions are based on DIN 2631 and EN 1092-1 (type 11) in the type 11 design with a formed hub.