Images are examples, some edited with AI. The technical data are authoritative. AI notice
Roller lever valve 5/2-way monostable, 1/8 NPT, 750 l/min VMEF-R-M52-M-N18 - Festo 8047097
For position sensing on cams, slides and cam tracks, Festo supplies the roller lever valve VMEF-R-M52-M-N18 with a monostable 5/2-way function. Rated for 750 l/min standard nominal flow, 1/8 NPT ports and -0.95 to 10 bar operating pressure. 20 mm width. Actuating force 38 N.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
750 l/min standard nominal flow at up to 10 bar operating pressure: that is the capacity of the roller lever valve VMEF-R-M52-M-N18. The roller lever valve is built as a monostable 5/2-way valve.
Why this valve
- 750 l/min standard nominal flow through a 5.2 mm nominal size.
- Switches vacuum from -0.95 bar as well as positive pressure up to 10 bar.
- 1/8 NPT thread for direct fitting connection.
- Actuating force 38 N.
- ATEX zones 1, 2, 21 and 22 as specified by the manufacturer for the VMEF-R-M52-M-N18.
- Corrosion resistance class CRC 1.
Application
In operation the VMEF-R-M52-M-N18 mainly handles position sensing on cams, slides and cam tracks. The roller lever valve is fastened via through-holes. Lubricated operation of the VMEF-R-M52-M-N18 is possible, but must then be maintained permanently. Manufacturer note: risk of pinching at the actuator.
Technical data
| Valve function | 5/2-way, monostable |
|---|---|
| Type of actuation | Mechanical |
| Width | 20 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 750 l/min |
| Pneumatic working port | 1/8 NPT |
| Operating pressure | -0.95 to 10 bar |
| Design | Piston spool, roller lever |
| Type of reset | Mechanical spring |
| Maximum stroke limit (hard) | 11.6 mm |
| Nominal size | 5.2 mm |
| Note on use | Risk of pinching |
| Sealing principle | Soft |
| Mounting position | Any |
| Type of piloting | Direct |
| Flow direction | Reversible |
| Overlap | Positive overlap |
| Maximum actuating speed with lateral actuation | 1.4 m/s |
| Maximum switching frequency | 3 Hz |
| Cam angle | 30° |
| Explosion protection | Zone 1 (ATEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX) |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation possible (then required for all further operation) |
| Corrosion resistance class CRC | 1 - low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Media temperature | -10 to 60 °C |
| Ambient temperature | -10 to 60 °C |
| Note on ambient temperature | Influence of heat on wear |
| Actuating force | 38 N |
| Product weight | 240 g |
| Type of mounting | With through-hole |
| Pneumatic connection, port 1 | 1/8 NPT |
| Pneumatic connection, port 2 | 1/8 NPT |
| Pneumatic connection, port 3 | 1/8 NPT |
| Pneumatic connection, port 4 | 1/8 NPT |
| Pneumatic connection, port 5 | 1/8 NPT |
| Note on materials | RoHS compliant |
| Material actuator attachment | Galvanised steel |
| Material cover | Reinforced PA |
| Material seals | NBR |
| Material housing | Anodised wrought aluminium alloy |
| Weight | 0.24 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VMEF-R-M52-M-N18 |
| EAN | 4052568435165 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium, anodised |
| Thread | NPT 1/8 |
| Nominal size DN [mm] | 5,2 |
| Seal material | NBR |
| Housing material | Aluminium, anodised |
| Medium | Compressed air |
| Function | 5/2 monostable |
| Flow rate [l/min] | 750 |
| Actuation type | Mechanical |
| Series | VMEF |
| Betriebsdruck max [bar] | 10 |
| Pneumatic connection | NPT 1/8 |
| Temperaturbereich | -10-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







