S1V series valve terminal, 10 x 5/2-way single solenoid, M5 side ports, ready for fieldbus module - E.MC

This S1V series terminal carries 10 single-solenoid 5/2-way valves and is prepared for a fieldbus module. You can install the manifold mechanically and pneumatically first and settle the fieldbus when the module is added. The M5 working ports are on the side of the base.

Advantages

• Choice of fieldbus: E.MC supplies modules for PROFINET, EtherCAT, EtherNet/IP, DeviceNet, CC-Link, PROFIBUS DP and IO-Link
• Swap valves without touching the tubing: M5 ports sit in the base, the valve comes off from above
• 11.5 mm pitch: 10 valve positions in a small footprint, DIN rail or screw mounting
• Easy to reconfigure: every position takes a single or double solenoid valve, including 5/3 and 2x 3/2 functions
• Service life: at least 40 million cycles, response under 15 ms, no lubrication required

Applications

• Pneumatic grippers, rotary actuators and stoppers in assembly and test fixtures
• Series machines where the pneumatics stay the same and the fieldbus changes from customer to customer
• Installations with limited height where the tubing should leave sideways
• Driving small double-acting cylinders and compact slides whose air demand is well covered by about 230 l/min per station

Accessories and spare parts

Blanking plates for unused positions, individual valves in other functions, M5 push-in fittings, silencers and mounting screws are available separately. The fieldbus module is not included.