Throttle check valve, exhaust air metering, R 1/8", port D 6 mm, nickel-plated brass

On small actuators with a low swept volume, the exhaust flow decides how smoothly they run. This exhaust-metering throttle check valve is screwed into the cylinder via R 1/8" and slows down only the escaping air, while the supply air passes freely. The push-in connection accepts tube with a 6 mm outside diameter and holds it with a stainless steel gripping ring. The approved pressure range is -0,95 to 10 bar at temperatures from 0 to +60 °C.

Benefits

• Compact design with a push-in connection for 6 mm tube
• Even cylinder travel without slip-stick effect up to 10 bar
• Housing in nickel-plated brass combined with PBT
• Cartridge in nickel-plated ZnDC and release ring in PBT
• Service temperature from 0 to +60 °C with an NBR seal
• Throttle screw adjustable by hand, no tool required

Applications

• Small cylinders in test rigs and laboratory fixtures
• Vacuum and compressed air duties from -0,95 bar upwards
• Electronics production requiring silicone-free seals and lubricants
• Tight valve arrangements using 6 mm tube