S2V series valve terminal, 8 stations 5/2-way, EtherNet/IP, G 1/8 side ports on sub-base - E.MC

Instead of wiring each solenoid separately, the terminal joins the EtherNet/IP network as a single node. It carries 8 single-solenoid 5/2-way valves with about 700 l/min per station and keeps the overall length to 200.5 mm.

Advantages

• Diagnostics for short circuit, wire break, reverse polarity and under- or overvoltage, with a configurable safe output state on bus failure.
• G 1/8 outlets on the sub-base: hoses stay connected when a valve is replaced.
• Reconfigurable: each station takes a single or double solenoid 5/2-way valve, a 5/3-way valve, a 2x 3/2-way valve or a blanking plate.
• Low heat load in the cabinet at 0.8 W per solenoid, with an LED for every switching state.
• Mounts on a DIN rail or with screws and runs on filtered air without a lubricator.

Applications

• Handling stations and fixtures with eight cylinders supplied from one point.
• Plants with a EtherNet/IP network where the terminal sits on the machine as a separate node.
• Installation in shallow housings or profile frames where hoses are routed out to the side.