Flow control valve with check function, exhaust air control, R 1/8", tube 8 mm, -0.95 to 1 bar

This flow control valve with check function sets the flow volume in a compressed air line. The version is exhaust air control. The connection is R 1/8". The materials are body Nickel-plated brass / PBT, seal NBR, retaining claw stainless steel, cartridge ZnDC nickel-plated, release ring PBT. The operating pressure is stated as -0.95 to 1 bar.

Advantages

• Media Compressed air, neutral gases, the valve needs no separate treatment.
• Version exhaust air control, so the speed is limited on the correct side of the piston.
• Push-in connector for tube with 8 mm outside diameter, release works without tools through the release ring.
• Connection thread R 1/8" for screwing directly into the cylinder end cap.
• Materials body Nickel-plated brass / PBT, seal NBR, retaining claw stainless steel, cartridge ZnDC nickel-plated, release ring PBT, only silicone-free seals and lubricants are used during assembly.

Applications

• Avoiding the stick-slip effect on slow running actuators.
• Matching forward and return stroke in cycled handling devices.
• Production environments within the temperature range 0 to +60 °C.
• Speed adjustment on pneumatic cylinders with 8 mm tube.