S1V series valve terminal, 12 x 5/2-way single solenoid, M5 top ports, PROFIBUS DP - E.MC

With 12 stations, this terminal runs a complete handling station over a single bus line. The integrated PROFIBUS DP module takes switching commands straight from the controller, and every station carries a single-solenoid 5/2-way valve drawing 0.8 W. The M5 working ports are on top of the valves.

Advantages

• PROFIBUS DP connection: M12, B-coded, bus module current below 50 mA
• Diagnostics: reports short circuit, open load, reverse polarity, under- and overvoltage, with a configurable output state on bus failure
• Easy access: M5 ports right on top of each valve, valves replaced from above
• 11.5 mm pitch: 12 valve positions in a small footprint, DIN rail or screw mounting
• Easy to reconfigure: every position takes a single or double solenoid valve, including 5/3 and 2x 3/2 functions

Applications

• Pneumatic grippers, rotary actuators and stoppers in assembly and test fixtures
• Decentralised valve manifold mounted on the machine and linked to the controller via PROFIBUS DP instead of discrete wiring
• Layouts where tubing exits upwards and every station stays clearly assigned
• Driving small double-acting cylinders and compact slides whose air demand is well covered by about 230 l/min per station

Accessories and spare parts

Blanking plates for unused positions, individual valves in other functions, M5 push-in fittings, silencers and mounting screws are available separately. Matching M12 cables are available for the bus line and the power supply.