Valve terminal 2 Series, 10x 5/2-way single solenoid, G 1/8 top-ported, DeviceNet - E.MC

With its integrated DeviceNet module, this valve terminal works decentrally, close to the cylinders. 10 single-solenoid 5/2-way valves on a 16 mm pitch switch at 1.5 to 8 bar.

Advantages

• Straight onto DeviceNet: bus connection M12 plug and M12 socket, 5-pin, A-coded, power via M12, no output card needed in the controller.
• Long service life: at least 40 million cycles, aluminium body and spool, NBR seals.
• Diagnostics over the bus: short circuit, wire break, reverse polarity, under- and overvoltage are reported, and the output state on bus failure is configurable.
• Ports within easy reach: the G 1/8 outlets sit on top of the valves, easy to get at during commissioning.
• High flow per station: effective area 16.2 mm² (Cv 0.9) on a pitch of only 16 mm.

Applications

• Multi-axis sequences with up to 10 cylinders supplied centrally from one valve terminal
• Assembly and packaging machines with mid-size cylinders that need more flow per valve
• Decentralised valve terminals right at the machine, integrated into an existing DeviceNet network
• Layouts with little room to the side, where the tubes leave upwards

Accessories

E.MC supplies M12 power cables, matching bus cables and blanking plates for unused stations.