Images are examples, some edited with AI. The technical data are authoritative. AI notice
Manifold sub-base for valve terminal VTUX-A-S grid 10.55 mm VABX-A-S-BV-AH-RV0XJAAAA - Festo 8196628
The manifold sub-base VABX-A-S-BV-AH-RV0XJAAAA from Festo combines supply and exhaust for the mounted valves. Important for selection: compatible with valve terminal VTUX-A-S, working ports 2 and 4 for 10 mm cartridge and grid dimension 10.55 mm.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The manifold sub-base VABX-A-S-BV-AH-RV0XJAAAA combines supply and exhaust for the mounted valves. Important for selection: compatible with valve terminal VTUX-A-S, working ports 2 and 4 for 10 mm cartridge and grid dimension 10.55 mm.
Your benefits
- Compatible with valve terminal VTUX-A-S
- Working ports 2 and 4 for 10 mm cartridge
- Grid dimension 10.55 mm
- Max. 4 valve positions
- Up to 8 valve coils
- Nominal flow rate 470 l/min
Use
A typical use of VABX-A-S-BV-AH-RV0XJAAAA is building compact valve terminals in machine and plant engineering. VABX-A-S-BV-AH-RV0XJAAAA creates a compact valve group with little tubing and fitting effort.
Technical data
| Order code | VABX-A-S-BV-AH-RV0XJAAAA |
|---|---|
| Festo part number | 8196628 |
| Size | 1 |
| Grid dimension | 10.55 mm |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Reverse polarity protection | Yes |
| Diagnostics via LED | Diagnostics per channel, Diagnostics per module |
| Diagnostics per internal communication | Switch-off load supply, Load supply undervoltage PL, Logic supply undervoltage PS, Load supply overvoltage PL, Logic supply overvoltage PS |
| Max. number of valve positions | 4 |
| Integrated function | With electrical interlinking module |
| Flow direction | Reversible |
| Max. number of valve coils | 8 |
| Compatible with | Valve terminal VTUX-A-S |
| Suitability for vacuum | Yes |
| Nominal flow rate standardised according to ISO 8778 | 470 l/min |
| Dimensions (W x L x H) | 42.05 mm x 104.3 mm x 43.1 mm |
| Fuse protection (short circuit) | Internal electronic fuse per channel |
| Inductive protective circuit | Integrated |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typical 24 mA |
| Intrinsic current consumption at nominal operating voltage load | Typical 7 mA |
| Note regarding operating voltage | SELV/PELV fixed power supplies required, Note the voltage drop |
| Power consumption at 24VDC | 0.74 W |
| Max. number of inputs | 8 |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Nominal operating voltage DC of load | 24 V |
| Power failure bridging | 10 ms |
| Electrical isolation of outputs between channel - internal communication | Yes |
| Potential separation between the supply voltages electronics/sensor technology and load/valves | Yes |
| Pollution degree | 2 |
| Permissible voltage fluctuations for electronics/sensors | ±25% |
| Permissible voltage fluctuation of load | ±10% |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 5 - 95% |
| Degree of protection | IP20, IP65 |
| Overvoltage category | II |
| Ambient temperature | -5 to 50 °C |
| Nominal altitude of use | ≤ 2000 m NHN |
| Max. installation height | 3500 m |
| Product weight | 120.7 g |
| Electrical control | AP interface |
| Max. address volume, outputs | 1 byte |
| Communication interface, protocol | AP |
| Mounting method for sub-base | With through-hole |
| Type of mounting | Tie rod |
| Pneumatic connection, port 2 | For 10 mm cartridge |
| Pneumatic connection, port 4 | For 10 mm cartridge |
| Note on materials | RoHS compliant |
| Material sub-base | Reinforced PA |
| Material seals | NBR |
| Material retaining bracket | POM |
| Material sleeve | High-alloy stainless steel |
| Material clip | High-alloy stainless steel |
| Material nut | High-alloy stainless steel |
| Manufacturer | Festo |
| Hersteller-Nr | VABX-A-S-BV-AH-RV0XJAAAA |
| EAN | 4052568658380 |
| Zolltarifnummer | 84819000 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Seal material | NBR |
| Operating voltage | 24 V DC |
| Protection rating | IP20 |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







