Union nut for cutting ring, tube 5 LL, zinc-plated steel, very light series

The union nut presses the cutting ring onto the cone of the stud as it is tightened and so holds the tube in the coupling. The data state a working pressure of 100 bar. The stated material is zinc-plated steel. This version is supplied with very light series.

Benefits

• Matches tube 5 LL (M10x1) of the very light series, so the nut fits the cone of the matching stud.
• Available as a single part, so a damaged nut can be replaced without changing the whole coupling.
• For working pressures up to 100 bar in this size.
• Temperature range -40 to +120 °C, made of zinc-plated steel.
• The hexagon allows tightening with an ordinary open-ended spanner, no special tool is needed.

Applications

When building a tube run of the very light series one nut per joint belongs to the cutting ring and the stud.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.