Transport bag for digital thermometer CTP1500 - Riegler 189301

Transport bag for digital thermometer CTP1500

About Digital thermometers

Digital thermometers are portable hand-held instruments for temperature checks where no permanently installed gauge is fitted. The CTP1500 works with a 6 mm immersion probe, covers -50 to 250 °C and is supplied with a 3.1 inspection certificate to EN 10204, tested at 0, 50 and 100 °C.

What matters when choosing

• Probe length: 170 or 300 mm. The probe has to be immersed deep enough, otherwise it also measures the vessel wall.
• Display range: -50 to 250 °C. The ambient temperature of the instrument itself is limited to 0 to 50 °C.
• Calibration certificate: the 3.1 certificate with three test points is included and is required for audited measurements.
• Power supply: two AA alkaline batteries, around 500 operating hours.
• Housing: impact-resistant ABS plastic. A matching carrying bag is available as an accessory.

Typical applications

• Spot measurements on pipework, vessels and power units.
• Maintenance and commissioning without a permanent measuring point.
• Documented temperature testing with works calibration.
• Cross-check measurements against permanently installed thermometers.