Images are examples, some edited with AI. The technical data are authoritative. AI notice
Push-in T-fitting L-shape »metallica«, rotating - Riegler K1222
Push-in T-fitting L-shape »metallica«, rotating. 14 variants from 5.37 EUR.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Push-in T-fitting L-shape »metallica«, rotating. This range covers 14 variants from 5.37 EUR. Select the version you need above.
Available variants
Shared technical data
| Applications | Druckluftanlagen, Schweißtechnik, Vakuum |
|---|---|
| Max. working pressure | 16 bar |
| Min. working pressure | -0,98 bar |
| Max. operating temperature | 150 °C |
| Min. operating temperature | -20 °C |
| Sealant | FKM, FPM |
| Recommended hose | PA, PU |
| Sleeve | Messing vernickelt |
| Material | Messing vernickelt |
| Medium | Druckluft |
| Series | metallica |
| Clamping ring | Edelstahl |
| Country of origin | IT |
| Customs tariff number | 74122000 |
About Male branch tees
A push-in T-fitting takes a second outlet directly out of a running compressed air line, so no separate manifold is needed. The tube is pushed in without tools and released via the release ring. The range covers tube outside diameters from 3 to 16 mm at working pressures of 10 to 20 bar.
What matters when choosing
- Pick the thread to match the port. Parallel G threads run from G 1/8 to G 1/2, tapered R threads from R 1/8 to R 1/2, with M3, M5 and M6 available for small valve and cylinder ports.
- The tube O.D. follows the line, not the thread. Sizes from 3 to 16 mm are covered and most thread and diameter combinations are available.
- Material depends on the surroundings. Plastic with nickel-plated brass is the standard build, all nickel-plated brass the fully metallic version, stainless steel 1.4404 the choice for corrosive atmospheres.
- The sealant follows the medium. NBR covers plain compressed air, FKM or FPM suits higher temperatures and oil-bearing media, and the FDA-compliant FKM version is intended for food contact applications.
- Operating temperature starts at -20 °C and ends either at 80 °C or at 150 °C depending on the version. Above 80 °C, check the data table of the individual article.
Typical applications
- Branching the air supply to two cylinders working in parallel on an assembly fixture
- Tapping off a pressure switch or gauge from a continuous line
- Building distribution runs and ring mains along the machine frame
- Linking closely spaced valve ports with M5 threads in tight installation space
- Connecting blow guns and blow-off nozzles to an existing supply line
Threads are made to DIN EN ISO 228-1, ISO 7-1 and DIN 13-1. Besides the Blue Series and Blue Series mini, the inox line, click-clock, metallica, universal short and NonPlusUltra ranges are available, 344 articles in total.
Technical data
| Thread | G 1/8 AG, G 1/4 AG, G 3/8 AG, G 1/2 AG, M3 AG, M5 AG |
|---|---|
| For hose OD [mm] | 4, 6, 8, 10, 12, 3, 14 |
| Manufacturer | Riegler |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Norm | DIN 13-1, DIN EN ISO 228-1 |
Downloads
Datasheet
- Datasheet (PDF)
- Data sheet Male branch tees 108940 DE
- Data sheet Male branch tees 108941 DE
- Data sheet Male branch tees 108942 DE
- Data sheet Male branch tees 108943 DE
- Data sheet Male branch tees 108944 DE
- Data sheet Male branch tees 108945 DE
- Data sheet Male branch tees 108946 DE
- Data sheet Male branch tees 108947 DE
- Data sheet Male branch tees 108948 DE
- Data sheet Male branch tees 108949 DE
- Data sheet Male branch tees 130111 DE
- Data sheet Male branch tees 130134 DE
- Data sheet Male branch tees 137016 DE
- Data sheet Male branch tees 137017 DE
User Manual
ESD version
Push-in T-fitting »Blue Series«, L-shape, rotating - Riegler K1290
Item RGL-K1290Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question
