Male stud tee, R 3/8", tube 10 S, zinc-plated steel, no nut or ring

This male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The article is listed with a working pressure of 630 bar. This version is listed with male stud thread R 3/8" and tube connection 10 S (M18x1.5). The stated material is zinc-plated steel. This version is supplied with heavy series and scope of delivery without nut and cutting ring.

Benefits

• Male stud thread R 3/8" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 10 S (M18x1,5) through a cutting ring in the heavy series.
• Working pressure up to 630 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

In hydraulics the version in zinc-plated steel holds 630 bar on all three paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.