Everis LQ4 non-spill coupling insert, G3/8 male thread, chrome-plated brass, FKM, red - CPC LQ4D47006REDV

This FKM-sealed variant complements the red insert LQ4D47006RED, sharing its G3/8 (BSPP) thread and valve. For the base version, CPC lists less than 0.025 cc spillage per connect and a pressure range from vacuum to 8.3 bar.

Use in the data center

Threaded into the G3/8 return port of a manifold or CDU, the insert receives the couplings on cold plate lines. CPC names EPDM and FKM as the standard seals of the series for glycol/water and dielectric coolants, and the right choice depends on the fluid, so check it beforehand. Servers are decoupled during operation without draining the loop.

Benefits

• FKM seal material: standard option of the series next to EPDM.
• Return marked red: clearly separated from blue supply lines.
• Pressure-rated break: base version: under 0.055 cc per disconnect at 120 psi.
• Redundant sealing: doubly protected against leaks while connected.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ4 series datasheet is available under Downloads.