Everis LQ4 non-spill coupling insert, G1/4 male thread, chrome-plated brass, EPDM, blue - CPC LQ4D47004BLU

This chrome-plated brass insert is the plug half of the Everis LQ4 coupling and threads straight into a port via its G1/4 male thread. The valve closes automatically on disconnect. CPC specifies less than 0.025 cc per disconnect at 0 psi and less than 0.055 cc at 120 psi, so nearby electronics stay dry.

Use in the data center

• Connects cold plates in direct-to-chip cooling where server sleds have to come out without draining the loop.
• Threads into rack manifolds and distribution blocks with G1/4 female ports.
• Hot-swap maintenance: disconnect under pressure up to 8.3 bar with negligible coolant loss.
• Blue color coding which, paired with the red versions, tells supply and return lines apart at a glance.

Benefits

• Dripless disconnect: under 0.055 cc released per disconnect at 120 psi and under 0.025 cc per connect.
• Redundant sealing when connected: an extra safeguard against leaks during long service intervals.
• No seal friction while connected: the valve still shuts off cleanly after the coupling has stayed mated for a long time.
• Low, ergonomic profile: fits tight electronics enclosures, and the latch makes orientation on manifolds and tubing easy to see.
• Wide temperature range: rated from -17 to 115 °C at pressures from vacuum to 8.3 bar.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ4 series datasheet is available under Downloads.