Everis LQ4 non-spill coupling body, 3/8" locking hose barb, chrome-plated brass, EPDM, blue - CPC LQ4D17006LBLU

The locking hose barb sets this part apart from the plain-barb version. It takes 3/8" tubing and, together with a mating insert, forms an Everis LQ4 joint with 1/4" flow. CPC specifies a range from vacuum to 8.3 bar, and a disconnect at full pressure releases less than 0.055 cc.

Use in the data center

In racks with direct-to-chip cooling, this coupling body carries tubing from a cold plate to the manifold or to the CDU supply. CPC names EPDM as the seal material for glycol/water mixtures. A sled can be uncoupled and replaced while the system runs, and the coolant stays where it belongs. Combined with red parts from the series, the blue version gives a clear split between supply and return.

Benefits

• Clean servicing: below 0.025 cc per disconnect with the loop at rest, under 0.055 cc at 8.3 bar.
• Broad temperature window: rated by CPC for -17 to 115 °C.
• Tight after long periods: no seal friction while connected, so the valve still breaks drip-free after months in place.
• Compact height: the lower, ergonomic profile fits tight electronics enclosures.
• Added protection: redundant sealing while coupled.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ4 series datasheet is available under Downloads.