Standard pressure gauge Ø 80 mm, G 1/2 radial bottom, 0 to 10 bar, plastic case, type 136 - Riegler 101956

For compressed air networks the Ø 80 mm standard gauge gives a direct reading across 0 to 10 bar. It connects via G 1/2 radial bottom.

Advantages

• Accuracy class 1.6, equal to a permissible error of ±0.16 bar over the span
• Ø 80 mm with bottom radial connection, G 1/2 male thread
• Plastic case, plastic window
• Red reference pointer to mark a set point or limit
• Medium and ambient temperature -20 to 60 °C
• Scale graduation 0.2 bar for accurate reading across 0 to 10 bar

Specifications

Typical use

It is typically used here: compressed air networks, air service units, regulators and compressors. Gases and liquids can be measured as long as they do not attack copper alloy, are not highly viscous and do not crystallise. For good readability the usual working pressure should sit in the middle third of the scale, here roughly between 3.33 and 6.67 bar.