Standard pressure gauge Ø 80 mm, G 1/2 radial bottom, 0 to 0.6 bar, plastic case, type 130 - Riegler 101950

This standard gauge displays positive pressure from 0 to 0.6 bar purely mechanically via a bourdon tube, so it stays readable without power. Nominal size Ø 80 mm, G 1/2 connection radial bottom.

Advantages

• Accuracy class 2.5, equal to a permissible error of ±15 mbar over the span
• Ø 80 mm with bottom radial connection, G 1/2 male thread
• Plastic case, plastic window
• Red reference pointer to mark a set point or limit
• Medium and ambient temperature -20 to 60 °C
• Scale graduation 0.01 bar for accurate reading across 0 to 0.6 bar

Applications

Common measuring points: low-pressure circuits, regulators for low pressures and test set-ups. Gases and liquids can be measured as long as they do not attack copper alloy, are not highly viscous and do not crystallise. For good readability the usual working pressure should sit in the middle third of the scale, here roughly between 0.2 and 0.4 bar.