Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pressure sensor -1 to 10 bar with IO-Link G1/8 SPAF-B11R-G18M-N-PNLK-M8 - Festo 8181211
The Festo pressure sensor SPAF-B11R-G18M-N-PNLK-M8 monitors relative pressure within -1 to 10 bar and switches via a switching output, PNP/NPN switchable. IO-Link is also available for connection to the controller. The pneumatic connection is male thread G1/8, the electrical connection an M8x1 plug, 3-pin.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The SPAF-B11R-G18M-N-PNLK-M8 measures relative pressure from -1 to 10 bar piezoresistively and converts it into switching signals.
Benefits
- Measuring range -1 to 10 bar, overload pressure 15 bar
- Accuracy ±1.5 %FS, repetition accuracy ±0.3 %FS
- Switching output PNP/NPN switchable, switching function window comparator, threshold value comparator, threshold value with variable hysteresis
- IO-Link
- LED display, setting via IO-Link, teach-in
- Degree of protection IP65, corrosion resistance class 2 (moderate corrosion stress)
Applications
Operating medium of the SPAF-B11R-G18M-N-PNLK-M8: compressed air to ISO 8573-1:2010 [7:4:4], inert gas, mounting with male thread. Because the range extends from -1 to +10 bar, the same sensor monitors vacuum and positive pressure. Supply voltage is 15 to 30 V DC.
Technical data
| Type | SPAF-B11R-G18M-N-PNLK-M8 |
|---|---|
| Festo part number | 8181211 |
| Approval | RCM |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | -1 bar |
| End value for pressure measuring range | 10 bar |
| Overload pressure | 15 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gas |
| Note on operating and pilot medium | Ester oil below 0.1mg/m³, according to ISO 8573-1:2010 [-:-:2], Lubricated operation possible |
| Media temperature | 0 to 50 °C |
| Ambient temperature | 0 to 50 °C |
| Accuracy in ± % FS | 1.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | PNP/NPN, switchable |
| Switching function | Window comparator, Threshold value comparator, Threshold value with variable hysteresis |
| Switching element function | NC or NO, switchable |
| Switch-on time | 3 ms |
| Switch-off time | 3 ms |
| Max. output current | 100 mA |
| Voltage drop | 1.6 V |
| Short circuit current rating | Yes |
| Overload protection | Available |
| Protocol | IO-Link |
| IO-Link, revision ID | V1.1 |
| IO-Link, device profile | Firmware update, Function locator, Function Product URI, Function quantity detection, Smart Sensor - SSP 4.1.1 |
| IO-Link, transmission rate | COM3 |
| IO-Link, SIO mode support | Yes |
| IO-Link, port type | Class A |
| IO-Link, process data length output | 0 bit |
| IO-Link, process data length input | 32 bit |
| IO-Link, process data content IN | Pressure measured value 16 bit MDC, Pressure monitoring 2 bit SSC |
| IO-Link, service data content IN | Temperature 16 bit |
| IO-Link, minimum cycle time | 0.9 ms |
| IO-Link, data storage required | 500 byte |
| Operational voltage range DC | 15 to 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 3 |
| Electrical connection 1, type of mounting | Snap-locking, Screw-type lock, Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock, Compatible with rotatable screw-type lock |
| Material connector housing | Reinforced PA |
| Type of mounting | With male thread |
| Mounting position | Any |
| Pneumatic connection | Male thread G1/8 |
| Product weight | 45 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Stainless steel, NBR, Reinforced PA |
| Display type | LED indicator |
| Ready status indication | Green LED |
| Switching status indication | Yellow LED |
| Setting options | IO-Link, Teach-in |
| Protection against tampering | IO-Link |
| Setting range threshold value | 0 to 100 % |
| Setting range hysteresis | 0 to 90 % |
| Degree of protection | IP65 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
| Manufacturer | Festo |
| Hersteller-Nr | SPAF-B11R-G18M-N-PNLK-M8 |
| EAN | 4052568649913 |
| Zolltarifnummer | 90262020 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Thread | G 1/8 |
| Measuring range max. [bar] | 10 |
| Medientemperatur [°C] | 0 bis 50 |
| Protection rating | IP65 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







