Images are examples, some edited with AI. The technical data are authoritative. AI notice

Pressure sensor -1 to 10 bar with IO-Link G1/8 SPAF-B11R-G18M-L-PNLK-VB-M12 - Festo 8181238

Festo ✓ Original product Brand new

The Festo pressure sensor SPAF-B11R-G18M-L-PNLK-VB-M12 monitors relative pressure within -1 to 10 bar and switches via a switching output, PNP/NPN switchable. Besides the analogue output 0 - 10 V, 1 - 5 V, IO-Link is available as a digital interface. Pneumatic connection male thread G1/8, electrical connection M12x1 plug, 4-pin.

Net
€132.48
excl. VAT
Item FES-8181238
Manufacturer no. SPAF-B11R-G18M-L-PNLK-VB-M12
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The SPAF-B11R-G18M-L-PNLK-VB-M12 measures relative pressure from -1 to 10 bar piezoresistively and converts it into switching signals and an analogue signal.

Benefits

  • Measuring range -1 to 10 bar, overload pressure 15 bar
  • Accuracy ±1.5 %FS, repetition accuracy ±0.3 %FS
  • Switching output PNP/NPN switchable, switching function window comparator, threshold value comparator, threshold value with variable hysteresis
  • Analogue output 0 - 10 V, 1 - 5 V and IO-Link
  • Blue illuminated LCD, setting via IO-Link, teach-in, via display and buttons
  • Degree of protection IP65, corrosion resistance class 2 (moderate corrosion stress)

Applications

Operating medium of the SPAF-B11R-G18M-L-PNLK-VB-M12: compressed air to ISO 8573-1:2010 [7:4:4], inert gas, mounting optionally with male thread, with accessories. Because the range extends from -1 to +10 bar, the same sensor monitors vacuum and positive pressure. Supply voltage is 15 to 30 V DC.

Technical data

TypeSPAF-B11R-G18M-L-PNLK-VB-M12
Festo part number8181238
ApprovalRCM
CE mark (see declaration of conformity)To EU EMC Directive, In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Note on materialsRoHS compliant
Measured variableRelative pressure
Measurement methodPiezoresistive pressure sensor
Start value for pressure measuring range-1 bar
End value for pressure measuring range10 bar
Overload pressure15 bar
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4], Inert gas
Note on operating and pilot mediumEster oil below 0.1mg/m³, according to ISO 8573-1:2010 [-:-:2], Lubricated operation possible
Media temperature0 to 50 °C
Ambient temperature0 to 50 °C
Accuracy in ± % FS1.5 %FS
Repetition accuracy in ± %FS0.3 %FS
Temperature coefficient in ± %FS/K0.05 %FS/K
Switching outputPNP/NPN, switchable
Switching functionWindow comparator, Threshold value comparator, Threshold value with variable hysteresis
Switching element functionNC or NO, switchable
Switch-on time3 ms
Switch-off time3 ms
Max. output current100 mA
Voltage drop1.6 V
Analogue output0 - 10 V, 1 - 5 V
Output characteristic curve start value0 V
Output characteristic curve end value10 V
Accuracy analogue output in ± %FS1.5 %FS
Linearity error in ± %FS0.3 %FS
Rise time6 ms
Min. load resistance voltage output20 kOhm
Display range start value0 %FS
Display range end value100 %FS
Short circuit current ratingYes
Overload protectionAvailable
ProtocolIO-Link
IO-Link, revision IDV1.1
IO-Link, device profileFirmware update, Function locator, Function Product URI, Function quantity detection, Smart Sensor - SSP 4.1.1
IO-Link, transmission rateCOM3
IO-Link, SIO mode supportYes
IO-Link, port typeClass A
IO-Link, process data length output0 bit
IO-Link, process data length input32 bit
IO-Link, process data content INPressure measured value 16 bit MDC, Pressure monitoring 2 bit SSC
IO-Link, service data content INTemperature 16 bit
IO-Link, minimum cycle time0.9 ms
IO-Link, data storage required500 byte
Operational voltage range DC15 to 30 V
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typePlug
Electrical connection 1, connector systemM12x1, A-coded to EN 61076-2-101
Electrical connection 1, number of connections/cores4
Electrical connection 1, type of mountingScrew-type lock, Not rotatable
Electrical connection 1, compatible type of mountingCompatible with rotatable screw-type lock
Material connector housingHigh-alloy stainless steel
Type of mountingOptionally With male thread, With accessories
Mounting positionAny
Pneumatic connectionMale thread G1/8
Product weight45 g
Material housingReinforced PA
Material in contact with the mediumStainless steel, NBR, Reinforced PA
Display typeBacklit blue LCD
Ready status indicationThrough backlighting
Setting optionsIO-Link, Teach-in, Via display and buttons
Protection against tamperingIO-Link, PIN code
Setting range threshold value0 to 100 %
Setting range hysteresis0 to 90 %
Degree of protectionIP65
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Weight0.05 kg
ManufacturerFesto
Hersteller-NrSPAF-B11R-G18M-L-PNLK-VB-M12
EAN4052568650186
Zolltarifnummer90262020
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
ThreadG 1/8
Measuring range max. [bar]10
Medientemperatur [°C]0 bis 50
Protection ratingIP65
Temperaturbereich0-50 °C
Temperature (max.)50

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought