Terminal box for valve terminal, without jump module, 8 stations, 24 V DC, IP 40

The terminal box forms the electrical part of a modular valve terminal and feeds eight stations through a single multipole connecting cable. This removes the laborious individual wiring of each solenoid, and up to 22 valves can be driven over one common line. Each station runs on 24 V DC with a power input of 2.5 W and carries an LED status indicator including a protective circuit. This version comes without a jump module, and the box measures 248.5 mm in length and 236.5 mm in width. It is pushed onto the manifold plate by a dovetail guide, so valves can be exchanged without undoing the wiring.

Benefits

• Eight stations served by one multipole cable instead of 16 single wires to the cabinet.
• Up to 22 valves can be addressed through one common connecting cable.
• LED status display and protective circuit per station as standard.
• Low power consumption of 2.5 W per station at 24 V DC.
• Compact footprint of 248.5 x 236.5 mm on the manifold plate.
• The dovetail guide makes valve replacement easier during service.

Applications

• Central valve islands in assembly lines with eight solenoids to be controlled.
• Machines where wiring is to be reduced to a single multipole cable.
• Installations close to the cabinet in dry surroundings according to IP 40.
• Plants with frequent valve changes where the wiring should stay untouched.

Standards and conformity

The terminal box reaches degree of protection IP 40. The 24 V DC control voltage may vary by ± 10 %.