Angle seat valve, pneumatic, G 1", brass, normally closed, PTFE stem seal

Once installed, the angle seat valve shuts off liquids, steam and gases in an inclined seat with a low pressure drop. This version is listed with connection G 1" and installation length 80 mm. The stated figure is a working pressure range of 0 - 16 bar. In addition the data give the normal position closed and the version PTFE stem seal.

Benefits

• Working pressure range 0 - 16 bar at connection G 1".
• Medium temperature -20 to +200 °C at an ambient temperature of -10 to +60 °C.
• Installation length 80 mm, valve body in brass.
• Control pressure 4 to 10 bar, 6 bar as the optimum, control port G 1/8 inch.
• Normal position closed in the PTFE stem seal version.

Applications

In process engineering the valve in brass works over a pressure range of 0 - 16 bar.

Standards and conformity

The data give a control pressure of 4 to 10 bar and a control port G 1/8 inch. The PTFE stem seal version sets the direction of flow.