Angle seat valve, pneumatic, G 1", 1.4408, normally closed, closing against flow, FKM

Once installed, the angle seat valve shuts off liquids, steam and gases in an inclined seat with a low pressure drop. It is supplied with connection G 1" and installation length 90 mm. It is produced from stainless steel 1.4408. In addition the data give the normal position closed and the version closing against the direction of flow, with FKM.

Benefits

• Working pressure range 0 - 22 bar at connection G 1".
• Medium temperature -10 to +80 °C at an ambient temperature of -10 to +60 °C.
• Installation length 90 mm, valve body in stainless steel 1.4408.
• Control pressure 4 to 10 bar, 6 bar as the optimum, control port G 1/8 inch.
• Normal position closed in the closing against the direction of flow, with FKM version.

Applications

In cleaning and filling plants the valve of 90 mm installation length and the normal position closed sits in the line.

Standards and conformity

The data give a control pressure of 4 to 10 bar and a control port G 1/8 inch. The closing against the direction of flow, with FKM version sets the direction of flow.