Pipe clamp with elastomer insert, size 2, pipe 18 mm, weld plate and cover plate

In use, the pipe clamp holds the pipe on its weld plate and absorbs pressure surges through the elastomer insert. It is produced from polypropylene with an elastomer insert in chloroprene rubber. The data give pipe outside diameter 18 mm, height 64 mm and width 30 mm.

Benefits

• The chloroprene rubber insert absorbs pressure surges of the pipe of 18 mm outside diameter.
• The size 2 of the heavy series follows DIN 3015 Teil 2 with 64 mm height and 30 mm width.
• The weld plate with dimensions 85 mm and 70 mm is welded straight onto the structure.
• The version with weld plate and cover plate determines how the clamp is closed at the top.
• The metal parts in bright and zinc-plated steel carry the clamp at an S dimension of 8 mm.

Technical data

Applications

On presses and power units the elastomer insert of the size 2 damps the pressure surges of the line.

Standards and conformity

Dimensions and sizes follow DIN 3015 Teil 2.