Pipe clamp with elastomer insert, size 2, pipe 17.2 mm, weld plate and cover plate

This pipe clamp to DIN 3015 Teil 2 holds the pipe on its weld plate and absorbs pressure surges through the elastomer insert. The article is listed with a pipe outside diameter of 17.2 mm. The stated figures are pipe outside diameter 17.2 mm, height 64 mm and width 30 mm.

Benefits

• The chloroprene rubber insert absorbs pressure surges of the pipe of 17.2 mm outside diameter.
• The size 2 of the heavy series follows DIN 3015 Teil 2 with 64 mm height and 30 mm width.
• The weld plate with dimensions 85 mm and 70 mm is welded straight onto the structure.
• The version with weld plate and cover plate determines how the clamp is closed at the top.
• The metal parts in bright and zinc-plated steel carry the clamp at an S dimension of 8 mm.

Applications

On presses and power units the elastomer insert of the size 2 damps the pressure surges of the line.

Standards and conformity

The size 2 of the heavy series complies with DIN 3015 Teil 2.