Pipe cap for pipe 76.1 mm, wall thickness 2.0 mm, stainless steel 1.4571, similar to DIN 28011

Once installed, the pipe cap closes the end of a pipe pressure-tight and is butt welded to the pipe. In addition the sheet lists a wall thickness of 2.0 mm. Decisive for the selection is a pipe outside diameter of 76.1 mm.

Benefits

• For pipe 76.1 mm outside diameter at a wall thickness of 2.0 mm.
• Domed shape to similar to DIN 28011, so the cap takes the internal pressure without extra stiffening.
• Material stainless steel 1.4571, so the cap can be welded to a pipe of the same grade.
• The wall thickness of 2.0 mm matches that of the pipe, so the weld stays even.
• Supplied as a formed part, so the pipe end does not have to be closed with sheet metal.

Applications

At the end of a pipe run 76.1 mm the cap closes the line and holds the internal pressure.

Standards and conformity

The 76.1 x 2.0 mm cap is made to similar to DIN 28011 and produced from stainless steel 1.4571.