Pipe cap for pipe 323.9 mm, wall thickness 3.0 mm, stainless steel 1.4541, similar to DIN 28011

The pipe cap closes the end of a pipe pressure-tight and is butt welded to the pipe. In addition the sheet lists a wall thickness of 3.0 mm. Decisive for the selection is a pipe outside diameter of 323.9 mm.

Benefits

• For pipe 323.9 mm outside diameter at a wall thickness of 3.0 mm.
• Domed shape to similar to DIN 28011, so the cap takes the internal pressure without extra stiffening.
• Material stainless steel 1.4541, so the cap can be welded to a pipe of the same grade.
• The wall thickness of 3.0 mm matches that of the pipe, so the weld stays even.
• Supplied as a formed part, so the pipe end does not have to be closed with sheet metal.

Technical data

Applications

At the end of a pipe run 323.9 mm the cap closes the line and holds the internal pressure.

Standards and conformity

The 323.9 x 3.0 mm cap is made to similar to DIN 28011 and produced from stainless steel 1.4541.