Prop-Druckventil-Z Z3DREE10VP2-1X/315XLG24K31A1M - Bosch Rexroth R901483247

The pressing force of one axis has to stay variable while the other consumers remain on full system pressure. The Z3DREE10VP2-1X/315XLG24K31A1M handles that as a sandwich plate in the 315 bar rating, governed by the 0...10 V voltage command.

Benefits

• 315 bar pressure rating, so the reduced circuit may sit close to system pressure.
• 0...10 V command value through on-board electronics on 24 V DC.
• Sandwich plate to ISO 4401-05-05-0-05, leaving the rest of the control block unchanged.
• NBR seals and HL hydraulic fluid.
• 3.36 kg weight at 120 l/min maximum flow and 350 bar maximum operating pressure.

Applications

Intended for joining presses, riveting stations and clamping axes whose force is set differently for each recipe. The controller supplies the pressure value and the valve converts it without an amplifier card. Connection diagram ISO 4401-05-05-0-05, 4 ports.

Manufacturer

Bosch Rexroth, material number R901483247, product family Z3DRE(E)10. Further data is given in the datasheets Proportional pressure reducing valve (RE 29282) and Hydraulic valves and hydro- (RE 07600-B).