Pressure Reducing Valve 3DREE16P-7X/200YG24K31F1M - Bosch Rexroth R901406795

Machine builders often fix the seal material because it decides the approval of the whole block. This build of the 3DREE16P-7X/200Y is sealed with NBR and works with HL class hydraulic fluid. It reduces pressure from P to A along a 4...20 mA command value at up to 300 l/min maximum flow and 315 bar operating pressure.

Benefits

• NBR seals, matching a material requirement for HL class mineral oil
• Pressure reduction from P to A along a 4...20 mA command value
• Up to 300 l/min maximum flow in size 16
• Operating pressure up to 315 bar, hole pattern ISO 4401-07-07-0-05
• On-board electronics, 24 VDC, 7-pole connector (6 + PE) to EN 175201-804
• 9.8 kg unit weight, two switching positions, four ports, UKCA conformity for EMC SI2016/1091

Application

The valve serves pressure branches of clamping fixtures, feed units and secondary circuits whose bill of materials prescribes NBR. An electrical command value allows the reduced pressure to be changed per production step without touching a manual adjuster. When replacing an existing valve, compare type designation, pressure range and seal material.

Manufacturer

Bosch Rexroth lists this valve under material number R901406795.