Prop-Druckbegrenzungsvt DBEME10-7X/350YG24K31A1M - Bosch Rexroth R901358182

Controllers with a 0...10 V analog output can set the relief pressure without an interface module. The DBEME10-7X/350YG24K31A1M uses that over the full range up to 350 bar at a flow of up to 700 l/min.

Benefits

• 350 bar pressure stage, command range up to the maximum operating pressure
• 0...10 V voltage command without an extra signal converter
• Up to 700 l/min flow across four ports to ISO 6264
• On-board electronics at 24 VDC, 7-pole (6 + PE) plug to EN 175201-804
• 4.64 kg, NBR seals, spool symbol P to T and P to Y, HL hydraulic fluid

Applications

The valve is used in presses and test rigs whose pressure profile comes from the controller. The setting can alternate within the cycle between low circulation pressure and full pressing pressure. Pilot oil is drained separately through the Y port.

Manufacturer

Bosch Rexroth, material number R901358182. The valve belongs to the DBEM(E) series for subplate mounting to ISO 6264.