Prop-Druckbegrenzungsvt DBEE6-2X/315G24K31A1V - Bosch Rexroth R901345967

Press force and clamping pressure in the upper range can only be controlled if the pressure rating is chosen to match. The DBEE6-2X/315G24K31A1V works with a 315 bar rating and a 0 to 10 V voltage command, at 350 bar maximum operating pressure at the port.

Benefits

• 315 bar pressure rating for circuits working at the upper end of the series.
• Command value 0 to 10 V, converted by the on-board electronics without an external amplifier.
• 30 l/min flow in size 6, ISO 4401-03-02-05 pattern, relief through P to T.
• Pilot-operated seat valve with FKM seals, 2.22 kg weight, HL hydraulic fluid.
• 24 VDC supply through a 7-pole (6 + PE) plug to EN 175201-804, UKCA conformity to SI2016/1091.

Technical data

Applications

The valve is used in presses, riveting lines and hydraulic clamping systems with high holding forces. The command value comes from the controller, so pressure profiles can be run across the cycle. FKM seals allow operation with correspondingly approved hydraulic fluids.

Manufacturer

Bosch Rexroth, material number R901345967. Characteristic curves, response times and the dimension sheet are contained in data sheet RE 29258.