Prop-Druckbegrenzungsvt DBEME10-7X/315YG24K31A1M - Bosch Rexroth R901344448

Between the 315 bar control stage and the 350 bar maximum operating pressure there is enough reserve for pressure peaks. The DBEME10-7X/315YG24K31A1M uses that range and is guided by a 0...10 V voltage command.

Benefits

• 315 bar pressure stage with reserve up to the 350 bar maximum operating pressure
• Flow up to 700 l/min across four ports to ISO 6264
• 0...10 V voltage command, on-board electronics, 24 VDC supply
• Spool symbol P to T and P to Y, two switching positions in size 10
• 4.66 kg, NBR seals, HL hydraulic fluid, 7-pole (6 + PE) plug

Applications

The valve limits pressure in presses, forging hammers and test rigs in the upper load range. The command comes from the controller and can be tracked within a test programme. Pilot oil drains separately through the Y port.

Manufacturer

Bosch Rexroth, material number R901344448. The valve belongs to the DBEM(E) series for subplate mounting to ISO 6264.