Pressure Reducing Valve DRE20-6X/200YMG24-8K4M - Bosch Rexroth R901325674

In clamping and feed circuits the pressure should not be set once but changed from the machine control. The pressure reducing valve DRE20-6X/200YMG24-8K4M reduces the pressure in line with the command value signal, works up to a maximum operating pressure of 315 bar and allows a maximum flow of 300 l/min. It is controlled electrically with external electronics at a supply voltage of 24 VDC.

Benefits

• Pressure reduction follows an electrical command value instead of a fixed setting, maximum operating pressure 315 bar.
• Maximum flow of 300 l/min across three ports in size 25.
• Electrical control with external electronics, supply voltage 24 VDC.
• Port pattern to ISO 5781 for subplate mounting, so a change needs no repiping.
• Spool symbol B to A with two switching positions.
• Weight of 6 kg, NBR seals for hydraulic fluid HL.

Applications

Typical places of use are clamping fixtures, feed drives and test rigs in which the pressure has to change during the cycle. Because the electronics sit outside the valve, the command value is processed in the control cabinet and the valve keeps to the hydraulic task. The subplate to ISO 5781 and the NBR seals for hydraulic fluid HL define the installation conditions.

Manufacturer

Bosch Rexroth, material number R901325674. Characteristic curves, command value assignment and installation dimensions are given in datasheet RE 29276 for proportional pressure reducing valves, with further data in datasheet RE 07600-B.