Pressure Reducing Valve DREME10-6X/50YMG24K31A1M - Bosch Rexroth R901292634

Holding low pressures accurately is harder than high ones because the control band is narrow. The DREME10-6X/50YMG24K31A1M therefore works on the 50 bar stage with a 0...10 V voltage command and lets up to 300 l/min pass.

Benefits

• 50 bar pressure stage for pre-tensioning, pressing and lubrication duties
• Flow up to 300 l/min, the low pressure stage does not limit throughput
• 0...10 V command, 24 VDC supply, on-board electronics inside the valve
• 315 bar maximum operating pressure at the inlet, three ports to ISO 5781
• 4.98 kg, NBR seals, HL hydraulic fluid, spool symbol B to A

Applications

The valve is used where workpieces are held gently or rollers are pressed on with a defined force. Lubrication and flushing loops that need high flow at low pressure are another case. The size 10 subplate stays the same as for the higher pressure stages of the series.

Manufacturer

Bosch Rexroth, material number R901292634. Characteristic curves and installation dimensions are given in data sheet RE 29276.