Pressure Reducing Valve DREM10-6X/50YG24-8K4V - Bosch Rexroth R901279572

Some circuits may only see a few tens of bar although the power unit delivers a multiple of that. The proportional pressure reducing valve DREM10-6X/50YG24-8K4V with pressure stage 50 is built for them, commanding the reduced pressure electrically while carrying up to 300 l/min.

Benefits

• Pressure stage 50 in the type code for consumers that tolerate only a small part of the system pressure.
• Command value from external electronics, the pressure setting stays identical across shifts and batches.
• 300 l/min across three ports in two switching positions, acting from B to A.
• Maximum operating pressure of the valve 315 bar, size 10 to port pattern ISO 5781.
• FKM seals, HL hydraulic fluid, 24 VDC through a 3-pole connector (2 + PE).
• 4.69 kg, subplate mounting without fittings on the valve.

Applications

The valve is used on counter-holders, supports and feeders that touch delicate parts, and in lubrication or preload circuits. Because the valve body itself is rated for 315 bar, it may sit in a high pressure circuit and lower only the consumer branch. Amplifier electronics in the cabinet keep the command value independent of any operator adjustment at the valve.

Manufacturer

Bosch Rexroth, material number R901279572, product family DRE(M)(E)10,20. Data sheet RE 29276 describes curves and control of the proportional pressure reducing valves, RE 07600-B places them within the range.