Pressure Reducing Valve DREE10-6X/200YG24K31A1M - Bosch Rexroth R901273234

A voltage output on the controller is enough to set the reduced pressure. The DREE10-6X/200YG24K31A1M turns the 0...10 V command into the 200 bar pressure stage and passes up to 300 l/min.

Benefits

• 0...10 V voltage command, taken straight from the machine controller
• 200 bar pressure stage at a maximum operating pressure of 315 bar at the inlet
• Up to 300 l/min flow, ISO 5781 interface, three ports
• On-board electronics at 24 VDC, 7-pole (6 + PE) plug to EN 175201-804
• 4.84 kg, NBR seals, HL hydraulic fluid, spool symbol B to A

Applications

The valve is used in machine tools, forming lines and handling equipment with a separate pressure level per axis. Without a signal converter the wiring stays simple. The valve sits on a size 10 subplate to ISO 5781.

Manufacturer

Bosch Rexroth, material number R901273234. Characteristic curves and installation dimensions are given in data sheet RE 29276.