Pressure Reducing Valve 3DREE16P-7X/200XYG24K31A1V - Bosch Rexroth R901226262

When converting an existing block, the first question is whether the hole pattern matches. This build of the 3DREE16P-7X/200XY sits on the ISO 4401-07-07-0-05 pattern for size 16 and handles the pressure reduction from P to A there. The on-board electronics take the command value as a 0...10 V voltage, and up to 300 l/min maximum flow at 315 bar is permitted.

Benefits

• ISO 4401-07-07-0-05 hole pattern for size 16, matching existing subplates
• Pressure reduction from P to A along a 0...10 V command value
• Up to 300 l/min maximum flow, operating pressure up to 315 bar
• Two switching positions, four ports, on-board electronics at the valve
• 24 VDC supply through a 7-pole connector (6 + PE) to EN 175201-804
• FKM seals for HL hydraulic fluid, 9.84 kg unit weight, UKCA conformity for EMC SI2016/1091

Application

The valve is intended for retrofitting existing control blocks where a branch is to be regulated electrically from now on. Besides the hole pattern, match pressure range, seal material and signal type to the plant. The complete build is named in the type designation 3DREE16P-7X/200XYG24K31A1V.

Manufacturer

Bosch Rexroth lists this valve under material number R901226262.