Pressure Reducing Valve 3DREE16P-7X/200YG24K31A1V - Bosch Rexroth R901213583

Every bar above the requirement turns into heat that has to be cooled away afterwards. The 3DREE16P-7X/200Y build holds the branch pressure from P to A at the value the controller supplies as a 0...10 V voltage and adapts it during operation. Up to 300 l/min maximum flow and 315 bar operating pressure are permitted.

Benefits

• Branch pressure set to the actual demand, which lowers waste heat in the circuit
• 0...10 V command value, on-board electronics at the valve, 24 VDC supply
• Up to 300 l/min maximum flow in size 16
• Operating pressure up to 315 bar, hole pattern ISO 4401-07-07-0-05, external pilot oil drain
• Two switching positions, four ports, 7-pole connector (6 + PE) to EN 175201-804
• FKM seals for HL hydraulic fluid, 10.22 kg unit weight, UKCA conformity for EMC SI2016/1091

Application

The valve is used in continuous operations with long holding phases, for example on clamping fixtures, presses and vulcanising plant. Because pressure can be lowered during the holding phase, less heat enters the oil. That eases the load on the cooling capacity of the power unit.

Manufacturer

The Bosch Rexroth material number is R901213583.