PU suction and delivery hose, inside diameter 75 mm, heavy, standard

This PU spiral hose to DIN 4102 B1 conveys chips, dust, granulate and oil in suction and delivery service. The data state a working pressure range of -0.30 to 1.16 bar. This version is listed with inside diameter 75 mm, outside diameter 85 mm and wall thickness about 1 mm. The stated material is polyether polyurethane with an embedded steel spiral. This version is supplied with the heavy design and the standard version.

Benefits

• Inside diameter 75 mm at an outside diameter of 85 mm.
• Working pressure range -0.30 to 1.16 bar at a wall thickness of 1 mm.
• Minimum bending radius 64 mm, kink-proof thanks to the embedded steel spiral.
• Flame retardant to DIN 4102 B1 and permanently antistatic with a resistance below 1000 MOhm per metre.
• Temperature range -40 to +100 °C, briefly up to +125 °C.
• Roll length 30 m, cut lengths are possible.

Applications

In the chemical industry and in fire-risk areas the hose with its 1 mm wall works flame retardant and antistatic.

Standards and conformity

The fire behaviour complies with DIN 4102 B1. The electrical resistance is below 1000 MOhm per metre.