PU suction and delivery hose, inside diameter 200 mm, medium, standard

Made to DIN 4102 B1, this PU spiral hose conveys chips, dust, granulate and oil in suction and delivery service. The article is made of polyether polyurethane with an embedded steel spiral. The data give inside diameter 200 mm, outside diameter 211 mm and wall thickness about 0.55 mm. The version is listed with the medium design and the standard version.

Benefits

• Inside diameter 200 mm at an outside diameter of 211 mm.
• Working pressure range -0.09 to 0.20 bar at a wall thickness of 0.55 mm.
• Minimum bending radius 120 mm, kink-proof thanks to the embedded steel spiral.
• Flame retardant to DIN 4102 B1 and permanently antistatic with a resistance below 1000 MOhm per metre.
• Temperature range -40 to +100 °C, briefly up to +125 °C.
• Roll length 30 m, cut lengths are possible.

Technical data

Applications

On industrial vacuum units the hose of 200 mm inside diameter picks up chips, dust and oil mist.

Standards and conformity

The hose is flame retardant to DIN 4102 B1, permanently antistatic, halogen-free and free of plasticisers.