Precision hydraulic tube EN 10305-4, without a weld seam, 8 x 2 mm, oiled steel

The precision steel tube carries hydraulic oil through the system under pressure and comes without a weld seam. This version is listed with 8 mm outside diameter and 2 mm wall thickness. Its rating is a design pressure in the range -1 to 528 bar. The version is listed with surface oiled steel.

Benefits

• Outside diameter 8 mm at a wall thickness of 2 mm.
• Design pressure -1 to 528 bar to DIN 2413.
• Drawn from E235 + N without a weld seam, every tube is tested by eddy current or ultrasound.
• Surface oiled steel, tolerances to DIN 2391 in grade C.
• Manufacturing length 6 m, part lengths are possible.
• Produced to EN 10305-4.

Applications

In plant construction the tube is available with a oiled steel surface, and the design pressure is -1 to 528 bar.

Standards and conformity

Dimensions and material comply with EN 10305-4 and DIN 2445/2, and the design pressure of -1 to 528 bar follows DIN 2413.