Precision hydraulic tube EN 10305-4, without a weld seam, 10 x 2 mm, oiled steel

The precision steel tube carries hydraulic oil through the system under pressure and comes without a weld seam and follows EN 10305-4. The article is listed with a design pressure in the range -1 to 460 bar. This version is listed with 10 mm outside diameter and 2 mm wall thickness. Material steel E235 + N is listed for this version. Also stated are surface oiled steel.

Benefits

• Outside diameter 10 mm at a wall thickness of 2 mm.
• Design pressure -1 to 460 bar to DIN 2413.
• Drawn from E235 + N without a weld seam, every tube is tested by eddy current or ultrasound.
• Surface oiled steel, tolerances to DIN 2391 in grade C.
• Manufacturing length 6 m, part lengths are possible.
• Produced to EN 10305-4.

Applications

In mechanical engineering the tube with its 2 mm wall is bent and connected through cutting ring couplings.

Standards and conformity

The tube follows EN 10305-4 and DIN 2445/2, its tolerances DIN 2391 in grade C and its pressure DIN 2413.