Precision hydraulic tube EN 10305-4, without a weld seam, 10 x 1.5 mm, zinc-plated and chromated

Made to EN 10305-4, this precision steel tube carries hydraulic oil through the system under pressure and comes without a weld seam. In addition the sheet lists a wall thickness of 1.5 mm. Decisive for the selection is a design pressure in the range -1 to 358 bar. The version is listed with surface zinc-plated and chromated.

Benefits

• Outside diameter 10 mm at a wall thickness of 1.5 mm.
• Design pressure -1 to 358 bar to DIN 2413.
• Drawn from E235 + N without a weld seam, every tube is tested by eddy current or ultrasound.
• Surface zinc-plated and chromated, tolerances to DIN 2391 in grade C.
• Manufacturing length 6 m, part lengths are possible.
• Produced to EN 10305-4.

Applications

In hydraulics the 10 x 1.5 mm tube carries the oil between pump, valve and cylinder.

Standards and conformity

Dimensions and material comply with EN 10305-4 and DIN 2445/2, and the design pressure of -1 to 358 bar follows DIN 2413.