Polyamide tube PA, diameter 10 x 8 mm, natural, cut length from a 50 m roll, working pressure 15 bar

In use, the polyamide tube carries compressed air, hydraulic oil and fuel in a semi-rigid, kink-resistant design. It is supplied with diameter 10 x 8 mm. It is produced from polyamide PA. In addition the data give colour natural and supply form cut length from a 50 m roll.

Benefits

• Working pressure 15 bar at a diameter of 10 x 8 mm.
• Minimum bending radius 60 mm, semi-rigid and kink-resistant.
• Temperature range -60 to +130 °C as per the data sheet.
• Shore hardness 65 D with good mechanical resistance and chemical resistance.
• Suitable for vacuum applications and for use in drag chains.

Applications

In air brake lines and hydraulic lines the tube can be routed down to a bending radius of 60 mm without kinking.