Ball valve, 3-piece, with pneumatic actuator, G 2-1/2", DN 65, spring opening

This ball valve to DIN 3202-M3 shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator. The stated material is 1.4408. The article is listed with a pressure range of -0.9 to 63 bar.

Benefits

• The three-piece body allows the ball insert to be removed without undoing the ports of 65 mm nominal size.
• The pressure range of -0.9 to 63 bar also covers vacuum duty.
• The spring opening version determines the position the valve takes without pilot air.
• The face-to-face length of 185 mm follows DIN 3202-M3.
• Body and ball in 1.4408 with a PTFE seat also carry aggressive media at 65 mm nominal size.

Applications

On vacuum and compressed air runs the range of -0.9 to 63 bar covers both duties with a single device.

Standards and conformity

The face-to-face length of 185 mm complies with DIN 3202-M3.