Ball valve, 3-piece, with pneumatic actuator, G 3/8", DN 12, double acting, FKM seal

Once installed, the ball valve shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator. It is produced from 1.4408. The data give thread G 3/8", nominal size DN 12 mm, face-to-face length 60 mm and switching function double acting, FKM seal.

Benefits

• The three-piece body allows the ball insert to be removed without undoing the ports of 12 mm nominal size.
• The pressure range of -0.9 to 63 bar also covers vacuum duty.
• The double acting, FKM seal version determines the position the valve takes without pilot air.
• The face-to-face length of 60 mm follows DIN 3202-M3.
• Body and ball in 1.4408 with a PTFE seat also carry aggressive media at 12 mm nominal size.

Applications

On vacuum and compressed air runs the range of -0.9 to 63 bar covers both duties with a single device.

Standards and conformity

Dimensions and the G 3/8" connection follow DIN 3202-M3.